Your home is a major investment. With proper care and maintenance, your house can last for as long as possible. While you may be tempted to have a repairman check out your house when something breaks, there are some problems that you can handle yourself. If you have been asking yourself “How can I make repairs on my house?,” the good news is that some home repairs may require little or no experience. Here are some of the simple repairs that you can do yourself.
Replace Broken Toilet Lever
With a broken toilet lever, you do not have to worry much. If pressing the lever does not flush the toilet, simply pop the tank open and re-attach the chain. However, there are cases when the handle can become corroded or any of the pieces connecting the handle to the flapper can break. The good news is that these components can be easily replaced.
Unclogging Toilet Drain
Before calling a plumber to unclog your toilet, you can do some troubleshooting first. Check if you are using the right plunger. Likewise, you should make sure that you are using the right tool for the job. If there is not enough water, pour just enough to submerge the head of the plunger. Give it 8-10 good downward thrusts. If you are constantly asking yourself “How can I make repairs on my house?, you will find out that minor clogs would clear up at this point and water would flow freely.
Fix A Leaky Bathroom Pipe
Most common pipe leaks happen under kitchen or bathroom sinks. It could be the washer is a little worn out or the compression nut sealing the washer is loose or broken. To fix the leak, turn the water off to the sink first. Some sinks have a shut off valve near the sink itself but others can be located in the basement.
Once the water is off, place a bucket below the pipe and twist the compression nuts. While you are at it, take the time to rinse out the curved pipe. When you have fixed the washer, put the screw back and turn the water back on.
Clear a Jammed Garbage Disposal
Garbage disposal is a mean machine composed of hidden blades and bad noises. However, clearing up a clog can be relatively easy. Simply cut off the power to the unit to avoid accidents. While some units are plugged into an outlet, others are wired directly to the wall. Once disabled, you can adjust the flywheel with an allen wrench. Then with a wooden dowel or some pliers, try to remove any clogging in the unit that may be near the top. Once free from obstruction, switch the power back, run water through the disposal to make sure that there is no more clog.
